|
|
| |
|
TOP
|
| SUBURBAN Collet-Master™ |
|
| |
 |
Features:
- 48 index positions,
every 7-1/2 degrees.
- Uses all standard
5C collets.
- Two sealed,
pre-loaded ball bearings in spindle.
- Hardened & ground
base held square and parallel to spindle within 0.0002".
- Maximum spindle
runout is 0.0001".
- Drawbar and
fitted wooden case included.
- Optional faceplate & v-block
available for eccentric forms.
|
| MODEL |
CENTER
HEIGHT |
O.A.L. |
INDEXING
ACCURACY |
WT(#) |
PRICE |
| CM-5C |
3-5/8" |
6-1/2" |
+/-45
SEC. |
9 |
Click
for Price |
| MODEL |
FACEPLATE
DIAMETER |
V-BLOCK
CAPACITY |
WT(#) |
PRICE |
| CM-5C-FVB |
6-1/2" |
1-3/8" |
15 |
Click
for Price |
| |
|
TOP
|
| SUBURBAN Master-Grind™
& Accessories |
|
| |
MODEL NUMBER:
MG5-CV-S1
U.S. Patent No. D327077 |
Features:
TWIN-DEX combination 5C collet and V-Block in one fixture.
- 72 position
index plate for hard index every 5 degrees.
- Built in sine
bar for setting angles between hard index locations.
- Two heavy
duty 4" diameter tapered roller bearings in spindle.
- Horizontal OR vertical
V-Block mounting
- Extra large
1-5/8" V-Block capacity.
- Square and
parallel within 0.0002".
- Spindle runout
0.00005".
- Fitted wooden
case included.
|
 |
MODEL
NUMBER |
V-BLOCK
CAPACITY |
COLLET
CAPACITY |
THROUGH
HOLE |
CENTER
HEIGHT |
HEIGHT |
BASE |
WEIGHT(#) |
PRICE |
| LENGTH |
WIDTH |
| MG5-CV-S1 |
1-5/8" |
ALL
5C |
1-1/4" |
3" |
6" |
4" |
5" |
22 |
Call |
ACCESSORIES
FOR MASTER-GRIND™
| MODEL NO. |
DESCRIPTION |
WEIGHT(#) |
PRICE |
| MG5-BTS |
Baseplate & tailstock |
22 |
Call |
| MG5-MD |
Motor
drive kit |
5 |
Click
for Price |
| Note: Factory
fitting of the MG5-CV-S1 to Baseplate and Tailstock is required.
This is included at no charge even when the Baseplate and
Tailstock is purchased separately from the index fixture. |
| |
|
TOP
|
| SUBURBAN
Mini-Master™ |
|
| |
|
Features:
- 72 position
index plate allows an index every 5 degrees.
- Light weight
for easy handling.
- Uses standard
ER-25 spring collets.
- Spindle runout
0.0002" T.I.R.
- 3" height
is ideal for small machine set-ups.
- Hardened steel
base is ground square and parallel with spindle axis within
0.0002".
- Fitted wooden
case included.
|
|
| MODEL |
CENTER
HEIGHT |
COLLET
CAPACITY |
THROUGH
HOLE |
WT(#) |
PRICE |
| MM-25-R |
1-7/8" |
All
ER-25 |
5/8" |
4 |
Call |
| |
|
TOP
|
| SUBURBAN
Spin-Master™ |
|
| |
 |
Features:
- Uses standard
5C collets.
- 2-5/16"
spindle travel for flute grinding.
- Runout on
hardened and ground spindle is 0.0005" T.I.R.
- 3-7/8" x 4-5/32"
base ground parallel to spindle.
- Sides of base
ground parallel to spindle axis.
- Index plate
with 36 holes for direct indexing in 10° steps & is
graduated in 5° increments. 10 vernier holes provide 1°
indexing.
|
| MODEL |
CENTER
HEIGHT |
COLLET
CAPACITY |
THROUGH
HOLE |
WT(#) |
PRICE |
| SM-5C |
2-3/4" |
All
5C |
1-1/4" |
15 |
Click
for Price |
| |
|
TOP
|
| SUBURBAN
Punch-Master™ |
|
| |
|
Features:
-
Built-in
sine bar for setting angles between hard index locations.
-
48 position index plate (for hard index every 7-1/2°).
-
Spindle
runs in two pre-loaded ball bearings.
-
Sealed bearings protect against grit and moisture.
-
Extra-large 1-5/8" V-block capacity.
-
Square and parallel within 0.0002".
-
Maximum spindle runout ±0.000050".
-
Light weight--under 12 pounds for easy handling.
-
Includes fitted, wooden, storage case.
|
| MODEL |
V-BLOCK
CAPACITY |
WT(#) |
PRICE |
| PM-V1 |
1-5/8" |
12 |
Call |
TOP
|
|
